Husqvarna BS 110, Руководство оператора, Страница: 12 / 120

To stop the product
1. Turn the speed control counterclockwise to the
lowest speed.
2. Release the drive levers.
3. Turn the start/stop and function selection switch to
the "0" position.
4. Stop the dust extractor.
5. Disconnect the power supply.
To remove a soft floor surface
WARNING:
Use protective gloves. The
blades are very sharp.
Note:
Short blades cut the floors easier than long
blades. Long blades are not always better or faster. A
short blade usually cleans the floor better than a wide
blade.
Note:
The blades are sharp for a longer time if the
work area is clean from unwanted material.
1. Use personal protective equipment. Refer to
Personal protective equipment on page 6
.
2. Install a self scoring blade. Refer to
To select the
correct blade dimension and installation position on
page 9
and
To replace the blade on page 17
.
WARNING:
Use protective gloves.
The blades are very sharp.
3. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to To sharpen the
blade on page 17
.
4. Cut a linear ditch in the floor.
5. Install a flat blade.
WARNING:
Use protective gloves.
The blades are very sharp.
6. Start at the ditch and remove the floor.
1
2
To remove a hard floor surface
WARNING:
Use protective gloves. The
blades are very sharp.
Note:
Short blades cut the floors easier than long
blades. Long blades are not always better or faster. A
short blade usually cleans the floor better than a wide
blade.
Note:
The blades are sharp for a longer time if the
work area is clean from unwanted material.
1. Use personal protective equipment. Refer to
Personal protective equipment on page 6
.
12 1804 - 001 - 06.05.2022