After you have finished the assembly, remove all wrappings and
pads on the frame and fenders. Check all the bolts to make sure
they are tightened. Ride the tricycle around and make sure it
rides smoothly.
INSTALLING REAR BASKET, PLATFORM AND CABINET
To install the basket, check to make sure you have two long and
two short basket brackets along with the bolts and nuts (see the
packing list).
Attach the long brackets to the rear frame using 40mm bolt (E).
Place the basket on the long brackets making sure that the basket
is centered on the rear frame. Secure the basket to the long
brackets with the short brackets using 30mm bolt (D) as shown
below.
Cruise Master rear basket comes with small clips that is used to
secure the basket walls. See the hardware diagram for correct
positioning of the clips.
T‐124 platform is installed the same way as basket. T‐326
platform brackets are different and should be installed according
to the drawing provided in the hardware pack.
T‐124 and T‐326 cargo cabinets are mounted using the long
brackets. The long brackets are placed on the inside of the
cabinet.
The bolt will first go through the long bracket, the cabinet, the
frame support tubing and is secured with washer and nut.
QUESTIONS?
If you have any questions or need assistance in
assembling this tricycle, please call Husky at (713) 932‐9320 or
(800) 392‐3337 between 8:30 AM and 5:30 PM Central Time.
17
