background image

page 1

Congratulations! You’ve got a brand new Cleary Bike! Before you get rolling, there are a few simple 
steps you need to take to ensure a safe and fun ride for your child.

First, register your bike on our website, 

clearybikes.com

. Registration validates your warranty and 

allows us to keep you apprised of changes, news, and special deals.

You can reach us with your bike and riding questions, comments, or concerns via email at 

[email protected]

, or on the phone at 

(415) 528-KIDS

 or 

(415) 528-5437

.  

We’re always happy to hear from you!

Next, it’s time to assemble and adjust the bike for your young rider. This manual has all the informa-
tion you need. You can also go to our website, 

clearybikes.com

, for video assembly instructions and 

tips.
 
If you purchased your bike from a dealer, who assembled and adjusted it, and gave you some tips, 
we still encourage you to read this manual through before taking your rider out for a spin.

WELCOME!

Welcome

What You Get

What You’ll Need

Assembly

Inflate The Tires

Before The Ride

Care and Maintenance

Warranty

CONTENTS

1

2

2

3 - 9

9

10

10

12

CONTACT US

Cleary Bikes
448 Coloma Street
Sausalito, CA 94965

(415) 528-KIDS / (415) 528-5437
 
[email protected]
clearybikes.com

Summary of Contents for Starfish













Reviews: