User’s Manual
power2max NG Power Meter
1 Quick Start Guide
Warning
Please read the user’s manual carefully before installation and use! Improper installation can cause
accidents. In case of doubt, consult a professional bicycle mechanic. Observe the indicated torque
values when installing screws and bolts. (See installation instructions at www.power2max.com.)
Before going on a ride, get to know the functions and operation of your power meter. Get a checkup
from a sports physician before starting your training program. Pay attention to traffic and road
conditions before checking any data.
Quick start guide
Thank you for choosing a power2max NG power meter! For installation, please download the
installation instructions: www.power2max.com
USB charging unit:
Please note: To charge your NG power meter, an USB charging unit with the USB
2.0 or higher standard is required.
Included:
power2max NG power meter
USB power cable
Quick Start Guide including inspection certificate
Optional:
NG colored ring, USB charging unit, Installation tools, Crank set, Bottom bracket, Chainring set,
Chainring bolts
Installation and operation:
1.
First, completely charge the power2max NG power meter:
a.
Open the USB cover.
b.
Connect the charging unit to the power2max NG power meter via the USB cable (the
LED indicator light flashes red during charging).
c.
Charging is complete when the red LED indicator light turns off.
2.
Remove the USB cable from the power2max NG power meter.
3.
The LED indicator light blinks green. Close the USB cover and connect the power meter to
your bike computer or your Bluetooth-enabled smartphone (observe manufacturer’s
instructions).
4.
Install chainrings onto the power meter. (Installation instructions at www.power2max.com.)
5.
Install the power meter at the crank. (Installation instructions at www.power2max.com.
Observe manufacturer’s instructions for torque values!)
6.
Install the crankset on the bicycle. (Installation instructions at www.power2max.com.
Observe manufacturer’s instructions for torque values!)
After installing, check the function of the front derailleur and adjust as necessary.
Finished! Now: go ride and have fun with your power2max NG!
