INSTALLATION
24
Bypass Track Systems
Step E. Mount the Shutter Panels
1.
Mount the panels onto the carriers and lock them in place by rotating the lever on the
receiver. Continue until all panels are secure.
2.
Check that floor clearance is acceptable. If not, lower or raise panels by adjusting both
carrier bolts the same amount.
Step F. Check for Alignment
1.
If necessary, adjust the carrier bolts so that all panels are at the same height.
2.
Open the louvers of the back panel where panels overlap and slide the front panel until the
stile is adjacent to or touching the open louvers. If gaps appear between the front panel stile
and the open louvers at the top or bottom, adjust the carrier bolts until no gaps appears.
3.
Finalize alignment by locating the side frames to their adjacent panel and secure to the wall
with fasteners.
Carrier
Receiver
Gaps
No
Gaps
INCORRECT
CORRECT
