Hunter Douglas Specialty Motorized Vertical Blinds, Установка Эксплуатация Уход

Страница: 7 / 24

INSTALLATION
5
Valance Assembly
For inside mount blinds, attach the dust cover valance directly to the head jamb. To mount it
outside the window, attach it to the headrail using the valance hangers. Please refer to the
sections below for your valance type.
Single-Tiered Dust Cover Closed Square Corner
Insert Attachment:
■
Cut a fabric insert for the valance and each valance
return 1" longer at each end than the valance and
valance return width.
notE:
Vinyl inserts are cut differently than fabric. Cut
vinyl flush with the ends. Secure vinyl in place with the
valance return clips.
■
Center the fabric insert in the valance and wrap
the excess on each side around to the back of
the valance.
■
At one end, hold the fabric insert in place with a
corner clip.
■
At the opposite end, pull the fabric insert tight and
secure it in place with another corner clip.
■
Center each valance return fabric insert and wrap
the excess on each side around to the back of the
valance return.
■
Attach the valance return to the valance using the
already attached corner clip.
■
At the opposite end of the valance return, pull the
fabric insert tight and secure it in place with a
valance return clip.
■
Repeat the previous three steps for the other valance return.
For inside mount blinds, proceed to “Install Mounting Clips (and Assembled Valance) —
Inside Mount” on page 9. For outside mount blinds, proceed to “Install Valance Bracket
Front Motor Mount Blinds — Outside Mount” on page 10.
Valance
Insert
Valance
1"
1"
Corner Clip
Valance Return
Clip