Hunt HNR-3016GN, Руководство пользователя

Страница: 8 / 57

2
1.2 System Startup
This NVR System receives the data of IP cameras based on ONVIF and stores it and transfers it to
other devices.
After connecting all peripheral devices, connect power cord to the NVR for system startup.
Input USER and PASSWORD for login after turning on the system. The factory default of user and
password are “ADMIN” and “1234” respectively. Admin user is to fully control the entire NVR system.
.
Note 1) Do not forget the administrator’s password that was set for the first time. In case the
password is forgot, contact your local dealer for help.
2) Refer to the “Section 3.1.2 User” for AUTO LOGIN and AUTO LOGOFF.
Caution It may take a few minutes to startup the system after turning on the power, in case that
user sets the network configuration as DHCP mode but there is neither DHCP server in
user’s network nor physical network connection.