Hunt HNR-3016GN, Руководство пользователя

Страница: 37 / 57

31
TYPE
Select the sensor type between N/O(Normal Open) and N/C(Normal Close), connecting to alarm input
plate. Circuit of N/O type is usually open, and the activation of the sensor occurs at the time of close,
and N/C type works the reverse way.
NOTIFY
User can select how to be alerted upon sensor is activated by pressing “NOTIFY” button.
The system will generate buzzer sound in the selection of buzzer and/or make pop-up screen of the
camera in the selection of camera pop-up. And both notifications work together when “All” is selected.
If user doesn’t want to notify during a certain period of time, select “ALARM DISABLE TIME” and set
the time.
Note Check the setting of the sensor type (N/O or N/C).
The alarm might not function if the used sensor type and the system setting are inconsistent.
Note “Camera pop-up” means that multi-screen live video mode will be switched to single channel
mode automatically upon alarm triggered. This single channel video is the channel triggered
by alarm.
Note It may have some limitation depending on the Model.
3.2.4. Motion Alarm
Motion alarm is to start the recording when motion is detected by installed camera based on the area
setting. The system will trigger alarm signal via the selected sensor-out channel.
User can set all channels at once by selecting “ALL” button of upper-right side.
-
ON/OFF
Turn on or turn off the motion alarm
OUT
Select the associated alarm output
Caution Relay contact can stand up to 24V/1A. In case that it is connected to the external circuit
which is over 24V/1A, it can cause a problem on the system.