Humminbird 698ci HD SI Combo Скачать руководство пользователя страница 24

Страница: 24 / 197

MARK Key

Press the MARK key while in any view to mark the position of a
waypoint. The MARK key function works if you have the GPS
receiver connected.

•

Active Cursor:

The waypoint will be marked at the cursor location.

•

Without Active Cursor:

The waypoint will be marked at the boat location.

•

If Screen Snapshot is active

, a waypoint will be created, and a screen

snapshot will also be saved to the optional-purchase SD memory card
(see

Views: Snapshot and Recording View

). Navigation is not affected

by the Screen Snapshot feature.

NOTE:

If Screen Snapshot is enabled but there is not a GPS receiver connected,

pressing the MARK key will capture the screen image and display an error saying
that a GPS position fix is required to create a waypoint.

NOTE:

You must have an optional-purchase SD memory card installed for the

screen snapshot feature to work.

GOTO Key

The GOTO key has multiple functions, depending on the situation:

•

Active Cursor:

Press the GOTO key while in any view to create a

waypoint and start navigation towards that waypoint.

•

Without Active Cursor:

Press the GOTO key to display the saved

waypoints list, and then highlight a waypoint. Press the RIGHT Cursor
key to begin navigation.

ZOOM (+/–) Key

The Zoom (+/–) key has multiple functions, depending on
the situation:

• In any of the

Navigation Views

or the

Sonar Zoom View

, press the

+/– Zoom key to change the scale of the view to appear closer or farther
away. See

Views

and

Introduction to Navigation

for more information.

The Control Head

Содержание 698ci HD SI Combo






































































































































































































Результаты поиска

Содержание 698ci HD SI Combo

Отзывы:

Похожие инструкции для 698ci HD SI Combo

Бренды по названию

Популярные бренды

Humminbird 698ci HD SI Combo, Руководство по эксплуатации

Результаты поиска

Содержание 698ci HD SI Combo

Отзывы:

Похожие инструкции для 698ci HD SI Combo

Бренды по названию

Популярные бренды