Human MT128V, Руководство пользователя

Страница: 38 / 41

ULTRASOUND EQUIPMENT USER MANUAL
38
When need to scan on real time, press
← ,
dynamic range increase; press
→ ,
dynamic range reduced.
Dynamic range size according to the information is showed on the right side of the screen area.
5.25 Gain Adjustment
Gain control including 8 period of the TGC, Gain (Gain)
Adjusting the TGC sliding handle, can adjust paragraphs respectively image gain strength; Slide the
handle to the "+" (right) when the sliding direction, image enhancement; Slide in the direction of "-"
(left), image.
Adjusting GAIN knob, can adjust image always GAIN strength;
Comprehensive adjust the TGC, GAIN, to make the image at the best state.
5.26 Probe Selection
If there a optional high frequency probe, press to chose the probe after exited from the noting
state. And the transformation order is: convex array probe→ high-frequency trans-vaginal probe →
high frequency linear probe→ convex array probe, etc.
The instrument enters convex array probe scanning after opening or reset.
5.27 Chinese and English Transformation
When in boot up state without measuring, noting or setting, press to select the language.
5.28 U Disk image storage
When scanning, choice the image to freeze which need to be stored, or after frozen bring up the
permanent image, insert the U disk to the USB socket at the back of panel. Press
USB
key, after it
shows
“ INPUT SAVE FILE NAME ： _ ”
, input the file name, then press , screen shows
“ WAIT … ” , then it is storing.
After the completion of the image storage, storage information
disappears, exit the storage condition.
The image file name cannot be more than eight character, the characters must be uppercase letters A to
Z or Numbers 0 to 9. If a name repetition, the system will automatically in the same file and add 1,
became the new file name for storage.
5.29 Resetting
The resetting means system reset, press key to revert the system to the boot up state.
5.30 Monitor Adjusted
Machine into other functions, under the condition of not press , eight direction key on the panel,
press the or can adjust the brightness of the LED screen, press the M key place of the
or button can adjust the contrast of the LED screen.
5.31 Turning Off
Turn off the host machine after using (The power switch in the "O" state
)
. If the instrument will not be
used for a long time, pull out the plug from the power supply.