ULTRASOUND EQUIPMENT USER MANUAL
20
Before use new probe, should tear down the protective tape gently.
When take off the probe from the host, should rotate the locked handle gently to the loosen state, to
pull out the probe plug.
4.4.3 External Video Equipment
The video output socket may connect with the video output equipment recommended by the company.
Install the instrument according to the operating instructions, and connect the video plug to the video
output socket.
4.4.4 Protective Grounding
In order to guarantee the security while using, user must use the ground wire provide by the
manufacturer which is in the packing box. Make sure one end of the wire is connected with ground
pole, and the other end is connected with the ground (The connection must be safe, effective and
reliable.).
If the ground wire is not long enough, it can be replaced by a metal wire whose sectional area is not
less than 1.00mm
2
.
4.4.5 Power Supply Connection
According to the requirements of power supply of the instrument (AC 110V~240V/1.5A 50Hz) should
to prepare plug seat. Make sure that the power supply is in the range of application. Insert one end of
the power line into the plug seat of the instrument; insert the other end of the line into the plug seat of
the power supply after confirming the power is off.
Figure 4-1 the probe connection diagram
