Hultafors HDL 100, Руководство по эксплуатации, Страница: 19 / 27

19
7.2.10 INDIRECT DISTANCE MEASUREMENT
1. Switching on the laser instrument.
2. Choose the indirect distance measurement
icon in the functions menu.
3. Measure the two points separately using
the individual measurement method. The
laser beam remains switched on between
the two measurements.
Once the second measurement is complete, the
length is automatically calculated and shown
on the bottom line of the display. The individual
measured values are shown in measured value
lines 1 and 2.
CAUTION
The two points measured must be in line
otherwise the measured values may be
incorrect.
7.2.11 ADDITION
1. Switch on the laser instrument.
2. Direct the laser point at the target.
3. Take an individual measurement.
4. Choose the addition (+) icon in the
calculation menu (plus appears on
the display).
5. Take an individual measurement.
The laser instrument shows the result on the
bottom line of the display. This process can be
repeated as many times as required.
7.2.12 SUBTRACTION
1. Switch on the laser instrument.
2. Direct the laser point at the target.
3. Take an individual measurement.
4. Choose the subtraction (+) icon in the
calculation menu (minus symbol - appears
on the display).
5. Take an individual measurement.
The laser instrument shows the result on the
bottom line of the display. This process can be
repeated as many times as required.
7.2.13 MEASURED VALUE MEMORY
1. Switch on the laser instrument.
2. Use the touch display to access the menu.
Choose measured value memory icon.
Swipe to left or right on the touch display to
toggle between measured values.
3. By pressing the camera button, single
measuring results can be deleted.
7.2.14 UNIT OF MEASUREMENT
1. Switch on the laser instrument.
2. Use the touch display to access the menu.
Choose measured value icon.
Pressing the icon switches the measurement
unit from ‘m’ to ‘ft’ then to ‘in’ and then ‘ft+in’.
Each time the instrument is restarted, the unit of