Hultafors HDL 100, Руководство по эксплуатации, Страница: 17 / 27

17
7.2.6 INDIRECT 2-POINT MEASUREMENT
1. Switch on the laser instrument.
2. Choose the indirect 2-point measurement
icon in the functions menu.
3. Measure the two points separately using
the individual measurement method. The
laser beam remains switched on between
the two measurements.
Once the second measurement is complete, the
length is automatically calculated and shown on the
bottom line of the display. The individual measured
values are shown in measured value lines 1 and 2.
Once the second measurement is complete, the
length is automatically calculated and shown
on the bottom line of the display. The individual
measured values are shown in measured value
lines 1 and 2.
CAUTION
The two points measured must be in line
and the second measurement must be
taken at a right angle to the measured
surface; otherwise measured values
may be incorrect.
7.2.7 INDIRECT 3-POINT MEASUREMENT
1. Switch on the laser instrument.
2. Choose the indirect 3-point measurement
icon in the functions menu.
3. Measure the three points separately using
the individual measurement method. The
laser beam remains switched on between
the three measurements.
Once the third measurement is complete, the
length is automatically calculated and shown
on the bottom line of the display. The individual
measured values are shown in measured value
lines 1, 2, and 3.
CAUTION
The three points measured must run
in a line and the second measurement
must be taken at a right angle to the
measured surface; otherwise measured
values may be incorrect.