Hultafors HDL 100, Руководство по эксплуатации, Страница: 15 / 27

15
7. Operation
7.1 Getting Started
7.1.1 SWITCHING THE INSTRUMENT ON AND OFF
On:
• Hold down the ‘ON/OFF/Delete/Back button’
for 2 seconds to switch the laser instrument on.
Off:
• Hold down the ‘ON/OFF/Delete/Back button’
for 2 seconds to switch the laser instrument off.
7.1.2 BACK
Press the ‘ON/OFF/Delete/Back button’ once
in order to cancel the previous process. Press
the ‘ON/OFF/ Delete/Back button’ twice to exit
the current function and return to individual
measurement mode.
7.1.3 SETTING THE MEASUREMENT PLANE
Use the touch display to access the menu. Press
the Measurement edge icon to toggle between
the front, thread and back of the instrument.
The selection is indicated by an arrow on the
display. The back of the instrument is set as
the measurement edge by default. Each time
the instrument is restarted, the back of the
instrument is reset as the measurement edge.
7.2 Applications
7.2.1 INDIVIDUAL MEASUREMENT
1. Switch on the laser instrument.
2. Direct the laser point at the target.
3. Press ‘measure button’.
As soon as an audible signal is emitted, the
measurement is complete and the distance can
be seen on the display. To calculate additional
distances, press Measure button again.
7.2.2 MIN/MAX MEASUREMENT
1. Switch on the laser instrument.
2. Direct the laser point at the target.
3. Press ‘measure button’ for 2 seconds.
The minimum and maximum values are shown
on the display. To stop the measurement, simply
press ‘measure button’.