Hultafors HDL 100, Руководство по эксплуатации, Страница: 18 / 27

18
7.2.8 AUTOMATIC DISTANCE MEASUREMENT
1. Switching on the laser instrument.
2. Choose the automatic distance
measurement icon in the functions menu.
3. The measurement is taken in the same
manner as a single measurement.
Once this has been completed, the length
is calculated automatically and is shown in
the bottom line of the display. The measured
distance and height are displayed in measured
value lines 1 and 2.
CAUTION
The two points measured must be in line
otherwise the measured values may be
incorrect.
7.2.9 INDIRECT MEASUREMENT VIA ANGLE
1. Switching on the laser instrument.
2. Choose the indirect measurement via angle
icon in the functions menu.
3. Measure the two points separately using
the individual measurement method. The
laser beam remains switched on between
the two measurements.
Once the second measurement is complete, the
length is automatically calculated and shown
on the bottom line of the display. The individual
measured values are shown in measured value
lines 1 and 2.
CAUTION
The two points measured must be in line
otherwise the measured values may be
incorrect.