Hughes HN9500 Скачать руководство пользователя страница 50

Страница: 50 / 94

Corrective action

Explanation

State name

State code

Transient – No action is necessary.

Router is in boot phase and is
waiting for indirect and direct
management packets.

Waiting for MIPs in Boot

Transient – No action is necessary.

Router is in boot phase and is
downloading commissioning
software.

Downloading
Commissioning
Software

Installer must complete validation.

Router is waiting for antenna
pointing validation to complete.

Occurs during installation only.

Waiting for Antenna
Pointing Complete

Installation – Commissioning phase

Transient – No action is necessary.

Router is starting up in
commissioning phase.

Starting Up in
Commissioning

Transient – No action is necessary.

Router is in commissioning phase.
Downlink has been established;

Downlink Established in
Commissioning

that is, beacon is being tracked and
transmission information packets
are being received.

Transient – No action is necessary.

Router is in commissioning phase
and is waiting for indirect and direct
management packets.

Waiting for MIPs in
Commissioning

Transient – No action is necessary.

Router is in commissioning phase.
Probing is in progress.

Occurs

during installation only.

Probing in Progress

Occurs during installation only.

Router is in commissioning phase.
Probing has failed.

Probing Failure

Transient – No action is necessary.

Router is in commissioning phase.
Router is registering with the
NOCC.

Registering ST

Occurs during installation only.

Router is in commissioning phase:
registration with the NOCC has
failed.

ST Registration Failure

Transient – No action is necessary.

Router is in commissioning phase;
router is waiting for capacity keys
from the NOCC.

Waiting for Capacity
Keys

Transient – No action is necessary.

Router is in commissioning phase;
router is reconciling profiles with
the NOCC.

Reconciling Profiles in
Commissioning

Transient – No action is necessary.

Router is in commissioning phase
and is downloading operational
software.

Downloading
Operational Software

Note:

State codes 1 – 20 appear only while the router is being installed or during a hard reboot (resulting

from power being removed and then restored).

Operational phase

HN9500 Satellite Router User Guide

1037737-0001 Revision E

System Control Center

Chapter 2

Содержание HN9500































































































Результаты поиска

Содержание HN9500

Отзывы:

Hughes HN9500, Руководство пользователя, Страница: 50 / 94

Результаты поиска

Содержание HN9500

Отзывы: