Range of values
Typical values
Parameter
Yes – FAP threshold is exceeded,
so transmission is reduced or
disabled for a period of time.
No – FAP threshold has not been
exceeded.
No
Fair Access Policy Threshold
Exceeded
Up – TurboPage Server connection
is up (all TTMP connections are up).
Down – TurboPage Server
connection is down (one or more
TTMP connections is down).
Up
TurboPage TTMP Status
Disabled – TurboPage is disabled.
Up – All configured IPSec sessions
have tunnels established.
Down – None of the configured
IPSec sessions have tunnels
established.
Disabled
IPsec Status
Not all sessions are up – Some of
the configured IPSec sessions have
tunnels established.
Disabled – IPSec is disabled.
Enabled – IPSec is enabled.
Primary
Alternate
Primary Attached
AGW Attach State
Unattached
Red flags on System Status page
A red flag next to a value on the System Status page indicates a problem related to the parameter
listed in the same row where the flagged value appears. For explanation, find the flagged
parameter in this table.
If a state code is displayed next to the parameter,
refer to
on
page 35 to identify the probable cause and possible solution.
Table 6: Red flags on System Status page
Possible solutions
Probable cause
Flagged parameter
See
on page
35.
Various causes are indicated by
state codes 26-35.
Receive Status (or)
Transmit Status
There is a problem with the
configured latitude and longitude.
Probing failure (occurs only during
commissioning).
This problem must be corrected by
a qualified installer.
This problem must be corrected by
a qualified installer.
Registration failure (occurs only
during commissioning).
23
HN9500 Satellite Router User Guide
1037737-0001 Revision E
Chapter 2
System Control Center