Figure 16: System Status page
The operational parameters listed on the System Status page are shown in a tabular format. The
first (left) column identifies the parameter categories:
• Satellite Interface – Contains information on the receive status and signal strength, as well
as error messages related to satellite router receive information.
• Administrative States – Contains information on software downloads to this satellite router,
security keys, and other administrative functions.
Typical values for System Status parameters
The following table lists typical values and the range of values for parameters on the System
Status page. This information may help you understand the values displayed by your satellite
router.
To see the definition of any parameter, click the parameter name on the screen.
Table 5: System Status parameters – typical values and range
Range of values
Typical values
Parameter
Satellite Interface (parameter category)
0–255.
160–220
Receive Signal Strength (value is
not displayed until about 2 minutes
after certain events such as router
re-boot or antenna repointing)
20–65.
29–45
Normalized Power Word (value is
not displayed until about 2 minutes
21
HN9500 Satellite Router User Guide
1037737-0001 Revision E
Chapter 2
System Control Center