Hughes HN9500, Руководство по установке

Страница: 64 / 136

Service activation prerequisites
Before proceeding, make sure the router and the customer’s computer are ready for service
activation. Prerequisites for service activation are:
• The router must be commissioned.
• The router must be connected to the customer’s computer (next step).
• You must have the SAN (a string that may include both numbers and letters) or SAN and
PIN (a four-digit number) available to enter when the activation process prompts for them.
Some service plans require only a SAN; some require both SAN and PIN. The Installation
Reference Sheet lists the SAN or SAN and PIN if both are needed.
• The customer’s computer must be configured for DHCP.
Connecting the satellite router to the customer’s computer
In this procedure you make sure the router is ready for activation and then connect the router to
the customer’s computer.
1. From the Terminal Initialization Sequence screen ( Figure 29: Terminal Initialization Sequence
screen – top part on page 50) or other Advanced Pages screen, click the Home link in the
upper right corner to open the screen that contains the Activate link.
Figure 29: Terminal Initialization Sequence screen – top part
The System Control Center home page appears, showing the Activate link below the HN9500
System Control Center screen title. See Figure 30: Activate link indicating router is ready
for service activation on page 51. Do not click the link at this time.
The
Activate
link indicates that the router is ready for service activation. This link appears
only on a new installation when the router is ready to be activated (after commissioning is
complete).
HN9500 Satellite Router Installation Guide
50
1037736-0001 Revision G
Activating the HughesNet service Chapter 7