Hughes HN9500, Руководство по установке

Страница: 123 / 136

Figure 63: Internet Protocol Properties dialog
2. In the Internet Protocol Properties dialog, click Use the following IP address.
3. Enter the following:
a) In the IP address field, type 169.254.10.10 .
This will be the laptop IP address.
b) Typically the Subnet mask field auto-populates to 255.255.0.0 . If it does not, enter this
value manually.
c) In the Default gateway field, type 169.254.0.1
.
This is the address you will use to access the router’s installation screens.
d) In the Preferred DNS server field, type 66.82.4.8 .
4. Click
OK
twice to close the Internet Protocol Properties dialog and the Network Connections
dialog.
5. Restart the computer.
The laptop computer is now configured to communicate with the satellite router so you can enter
installation parameters and monitor commissioning progress.
Configuring a second IP address on the installer laptop
If you do not want to make address changes on the laptop computer during router installation,
you can configure a link-local IP address and a
second (alternate) private IP address. Then you
can access the satellite router and browse the Internet without changing the IP address settings
on the laptop.
The instructions here assume you have already set up an address
on the laptop
as explained in Configuring a link-local IP address on the installer laptop on page 108.
Configure the second IP address as follows:
1. Use the Windows Control Panel to open the Local Area Connection Properties dialog and
then the Internet Protocol (TCP/IP) Properties dialog.
2. Click Advanced to open the Advanced TCP/IP Settings dialog.
109
HN9500 Satellite Router Installation Guide
1037736-0001 Revision G
Appendix A Alternate address for installing the router