Using the Web UI
3004128-0001 Revision C
15
Connections
The Connections icon has three configuration areas to select
from: Manage Contexts, Automatic Context Activation (ACA),
and Manage APN. The following section will review each of
these pages.
Manage Connections
Manage Connections
page under the Data tab allows the user to
setup and configure PDP contexts (data connection) for any TE
that is connected to the UT. It also shows you all current Active
Connections.
Open a New Connection
- To open a new connection, enter the
required data in the lower box.
Owner
– Your current IP address is shown by default (.101), but
you can change it to control connections for any other device
