Hughes 9211 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 80

background image



Declaration of Conformity

3500988-0001 Revision A

65

FCC Compliance



This device conforms to the FCC rules. Any changes or
modifications to Hughes Network Systems’ equipment, not
expressly approved by Hughes Network Systems, could void
the user's authority to operate the equipment.



To comply with FCC RF exposure requirements, this device
must be operated with a minimum separation distance of one
meter from the front of the satellite terminal’s antenna to a
person's body. Other operating configurations should be
avoided.



This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions; (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.



This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.

«
...
71
72
73
74
75
...
»

Содержание 9211

















































































Отзывы:

Нет отзывов

Похожие инструкции для 9211

Бренд: KJM Страницы: 5

Бренд: HiBoost Страницы: 15

104590-1 FPD.5-5.8-18

Бренд: Radio Waves Страницы: 5

CMAX-DMF-43-UW-i53

Бренд: CommScope Страницы: 5

Бренд: Steren Страницы: 2

Бренд: AARCOMM Страницы: 6

Бренд: A.H. Systems Страницы: 14

Бренд: M2 Antenna Systems Страницы: 5

Бренд: M2 Antenna Systems Страницы: 17

Бренд: Lectrosonics Страницы: 8

TracPak GPS 30/30 SL

Бренд: Garmin Страницы: 42

Бренд: WaveForm Страницы: 16

Бренд: JVC Страницы: 42

Бренд: GAP Страницы: 17

Бренд: Panorama Antennas Страницы: 7

Бренд: TracVision Страницы: 8

Oyster Vision 3

Бренд: SmartSat Страницы: 2

Бренд: Simrad Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды