34
Using the Web UI
3500988-0001 Revision A
If you want to setup additional ranges of addresses, please follow
the same instructions as above.
You cannot overlap the IP address ranges. If you do, an error
message will pop-up telling you that you have an overlap region.
Check all of the ranges for overlaps and try again.
When you are finished, click on
Update Static Settings
and you
should see a message saying “Operation Successful”.
DHCP Automatic Contexts:
This option allows you to set up
the UT for dynamic
standard
ACA. This means that any device
connected to the UT via
DHCP
, whether wired or wirelessly,
will automatically receive a standard context.
Note: Streaming
contexts are not supported with DHCP ACA
. For Streaming
contexts, you must use Static ACA, described above.
To activate this feature, select “On” or “Data” from the drop
down list under the
DHCP Automatic Contexts
section. The
DHCP address range is configured on the IP Address/DHCP
Settings page. The APN will be the default APN configured on
the
Manage APNs
page.
