Using the Hughes 9211
3500988-0001 Revision A
7
LCD Quick Start
Pressing the power button for at least two (2) seconds in order
to Power On the terminal. The LCD will display “Hughes
9211” for about 30 seconds while the terminal is booting up.
Since the Hughes 9211 terminal is a portable device, you must
first obtain a GPS fix and then point the terminal to the
Inmarsat satellite before setting up a data connection with the
network.
You can use the LCD display to aid in pointing as described in
Using the LCD and Keypad
on Page 17.
The top line gives the compass bearing and elevation angle of
the closest satellite.
Use the signal quality bar and numeric display on the lower
line to help point the UT to the satellite. While in pointing
mode, you may also activate the audio pointing aid by a long
press of the audio button on the right.
Once you have accurately pointed the unit to the satellite
(signal level of 52 to 55dB), exit pointing by a long press (>2
seconds) of the
Back
button. The unit will now attempt to
register with the satellite network.
Once the unit has registered and is Circuit Switched (CS) and
Packet Switched (PS) attached (“Ready” on the LCD), you can
create a data connection from the menu by scrolling through
the various selections and by pressing the “Accept” button
Scroll
Back
Scroll
Accept
User
Audio
Cancel
Power
WiFi