HUDSON STEEL H8105, Руководство пользователя

Страница: 12 / 23

Step 2
1.Attach the Cam Frame (#5) to the Main Frame (#2) using:
two M10*25 FHCS (nylon patch) (#55) two ct>38*6 End Cap (#21)
one ct>25*120 Main Shaft (#11)
2.Attach the Swing Tube (#6) to the Cam Frame (#5) using:
one M 10*25 FHCS (nylon patch) (#55)
one ct>38*6 End Cap (#21)
3.Attach the Left Handle (#7), the Right Handle (#8) to the Seat & Back Frame
(#3) using:
two M10*100 HHB (#63) four ct>11*ct>23*2 Flat Washers (#68)
two M10 Nylon Lock Nut (#71)
4.Attach the Seat Pad Plate (#24) to the Seat & Back Frame (#3)using:
four M10*25 FHCS (#56) four ct>11 *ct>23*2 Flat Washers (#68)
four M10 Nylon Lock Nut (#71)
5.Attach the Back Pad Tube (#9) to the Back Pad Support (#10) using:
two M10*50 HHB (#64) four ¢11 *ct>23
z
2 Flat Washers (#68)
two M10 Nylon Lock Nut (#71)
Note:Hand
tighten bolts and Nylon Lock nuts until machine is fully assembled.
-12 -