Hubner FGH 8, Инструкция по эксплуатации и сборке

Страница: 17 / 30

Incremental hollow shaft encoder FGH 8
FGH8_MANUAL-en_R6(2018-11-19)ID74584.docx
17
5.3.2 Technical note
Ambient temperature
The permissible ambient temperature depends on the speed and degree of protection (shaft seal) of
the device and the frequency, the signal cable length and mounting situation.
See chapter 3.2
Degree of protection
To fulfill degree of protection requirements the diameter of the connection cable must correspond to
that of the cable gland. Please refer to Chapter 5.3.1.
6 Dismantling
6.1 Safety instructions
Personnel:
Dismantling must be carried out by skilled technical staff only.
Observe the safety instructions contained in Chapter 2 when dismantling the device!
6.2 Dismantling the encoder
To dismantling the encoder follow the instructions give in chapter 5.2 in the reverse order.