Hubner FGH 8, Инструкция по эксплуатации и сборке

Страница: 6 / 30

Incremental hollow shaft encoder FGH 8
6
FGH8_MANUAL-en_R6(2018-11-19)ID74584.docx
1.4 Disclaimer
All information and instructions in these Operating and Assembly Instructions have been provided under
due consideration of applicable guidelines, as well as our many years of experience.
The manufacturer assumes no liability for damages due to:

Failure to follow the instructions in the operating and assembly instructions

Non-intended use

Deployment of untrained personnel

Opening of the device or conversions of the device
In all other aspects the obligations agreed in the delivery contract as well as the delivery conditions of
the manufacturer apply.
1.5 Copyright
NOTES!
Content information, text, drawings, graphics, and other representations are protected
by copyright and are subject to commercial property rights.
It is strictly forbidden to make copies of any kind or by any means for any purpose other
than in conjunction with using the device without the prior written agreement of the
manufacturer. Any copyright infringements will be prosecuted.
1.6 Guarantee terms
The guarantee terms are provided in the manufacturer’s terms and conditions.
1.7 Customer service
For technical information personnel is available that can be contacted by telephone, fax or email.
See manufacturer’s address on page 2.
2 Safety
DANGER!
This section provides an overview of all the important safety aspects that ensure
protection of personnel, as well as safe and trouble-free device operation.
If these safety instructions are not complied with significant hazard can occur.
2.1 Responsibility of the owner
The device is used in commercial applications. Consequently the owner of the device is subject to the
legal occupational safety obligations and subject to the safety, accident prevention and environmental
protection regulations that are applicable for the device’s area of implementation.
2.2 Intended use
The device has been designed and constructed exclusively for the intended use described here.
Series FGH 8 Incremental hollow shaft encoder are used for measurement of rotations, for instance of
electrical and mechanical drives and shafts.
Claims of any type due to damage arising from non-intended use are excluded; the owner bears sole
responsibility for non-intended use.