Hubner FGH 8, Инструкция по эксплуатации и сборке

Страница: 11 / 30

Incremental hollow shaft encoder FGH 8
FGH8_MANUAL-en_R6(2018-11-19)ID74584.docx
11
Signal outputs
Basic version (n = pulses/revolution)
One pulse channel (basic) with n direct square
wave pulses, corresponding to the segment
division and LED monitoring output. (optional).
Option 90
2
nd
pulse channel as basic version, but with 90°
electrical phase shift.
Option N / N2
Marker pulse, mechanically fixed. One square
wave pulse per revolution.
Option G
Additional inverted output signals for basic and
90°channels, marker pulse pulse LED check.
Option F
With 2 or 4 times as many pulses as the basic
version.
No direction of motion can be derived from the
multiple number of pulses.
Required: Option 90°
Option B
Fast and precise sensing of rotational direction
at each edge of the basic and 90°channels,
Required: option 90°.
Output
L R
cw 0 1 Option
B, B2
ccw 1 0
Still stand 0 0 Option B2
Option B2
As option B, but with standstill sensing.
Option V
Electronic pulse doubling of basic and
90°channels by multiple evaluation.
Option L
Power output up to 150 mA for basic channel,
90° channel and the corresponding inverted
signals.
Option J
Reduced rotational frequency modulation by
means of optically adjusted pulse disk.
Option S
Electronic overspeed switch with 2
programmable switching outputs, EGS4 version.