Hubner FGH 8, Инструкция по эксплуатации и сборке

Страница: 9 / 30

Incremental hollow shaft encoder FGH 8
FGH8_MANUAL-en_R6(2018-11-19)ID74584.docx
9
3 Technical Data
3.1 Type plate
The figure below shows an example of a nameplate:
Encoder with 2 terminal boxes
The type plate is located on the outside of the housing and contains the following information:

Manufacturer, Address

Type, Year of construction

CE marking

Serial number (S/N)

Commission number (C/N)

Pulse rate

Protection class

Power supply
3.2 Electrical and mechanical data
Pulse rates Value
Preferred Pulse Rates
1024, 2800, 4096
Special pulse rates 600, 720, 750, 1000, 1200, 2048, 2560
Connection data
Supply voltage 12 V to 30 V DC (option 5 V DC) Ripple max. 10 %
No load-current approx. 100 mA at 30 V (without Option)
Outputs
1)
Push-pull final stages, resistant to short-circuit
Pulse height (HTL) approx. as supply voltage, special output:
Output current 50 mA per output
Internal resistance 50
Ω
per output
Slew rate 50 V / µs
1)
Special output voltage 5V
(specify on order)
Supply voltage: 12 V to 20 V DC or 20 V to 30 V DC
Outptus: push-pull output stages with inverted signals.
Pulse height: 5 V to RS 422.