Huber HTS 15 EO, Руководство по эксплуатации

Страница: 53 / 82

Setup mode
Chapter 4 OPERATION MANUAL
V2.3.0en/22.04.20//17.12
Heat Transfer Station eo
53
4.2.9.1.1 Sub-category: “Internal”
Enter the new values for “KP”, “Tn” and “Tv” here one after the other.
PROCEDURE

Go to the “Categories Menu”.

Tap on the category “Temperature Control”.

Tap on the category “TAC/Manual”.

Tap on the sub-category “Configuration manual”.

Tap on the sub-category “Change parameters”.

Tap on the sub-category “Internal”.

Enter the new “KP” value using the number keypad that appears.

Confirm your entry by tapping on “OK”.

Enter the new “Tn” value using the number keypad that appears.

Confirm your entry by tapping on “OK”.

Enter the new “Tv” value using the number keypad that appears.

Confirm your entry by tapping on “OK”.
4.2.9.1.2 Sub-category: “Jacket”
Enter the new value for “KP” here.
PROCEDURE

Go to the “Categories Menu”.

Tap on the category “Temperature Control”.

Tap on the category “TAC/Manual”.

Tap on the sub-category “Configuration manual”.

Tap on the sub-category “Change parameters”.

Tap on the sub-category “Jacket”.

Enter the new “KP” value using the number keypad that appears.

Confirm your entry by tapping on “OK”.

Read the message and confirm it by tapping on “OK”.
4.2.9.1.3 Sub-category: “Process”
Enter the new values for “KP”, “Tn” and “Tv” here one after the other.
PROCEDURE

Go to the “Categories Menu”.

Tap on the category “Temperature Control”.

Tap on the category “TAC/Manual”.

Tap on the sub-category “Configuration manual”.

Tap on the sub-category “Change parameters”.

Tap on the sub-category “Process”.

Enter the new “KP” value using the number keypad that appears.

Confirm your entry by tapping on “OK”.

Enter the new “Tn” value using the number keypad that appears.

Confirm your entry by tapping on “OK”.

Enter the new “Tv” value using the number keypad that appears.

Confirm your entry by tapping on “OK”.