Pub. 42004-467D
Camera Telephone Manual
Page 11 of 30
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-467D.docx
04/19
9.
Configure the telephone:
1.
Configure the hardware as required (see the Hardware Configuration section).
2.
Adjust the audio levels, if necessary (see Figure 12 for speaker volume and microphone
sensitivity potentiometer locations).
3.
Perform the initial programming (see the Programming section).
10.
Verify operation by calling to and from another phone.
11.
Attach the front panel assembly to the rear enclosure mounting flanges using the six supplied #10-32
security screws and washers.
12.
Torque the screws to 10–12 in∙lb.
Figure 10. Model 397-001CAM and 398-001CAM Mounting Details
