16
hand hold air pump handle while right hand press down igniter button to
actuate slowly ,
Until after heard 1 or 2 explosion sounds, pull up oil button, then, pump a little
bit fast will start up machine, if still could not start up, please repeat this
procedure.)
5. After start up, turn solution tap points to “On” position, start spray fogging.
6. If want stop spray fog, firstly turn solution tap points to “Clean Solution” position,
release residual pressure inside chemicals tank.
7. Then, turn solution tap points to “Off” position, stop spray fog.
8. Push down oil button, stop machine.
Please note: We have fixed well the standard site of the adjust knob, do not adjust, if it is
really necessary need to increase power, please do not increase more than 3 scales.
Optional accessory
Auto-Cut Device
After start up, turn auto-cut device handle to right side end, turn solution tap points to “On”
position; when machine suddenly flameout, the auto-cut device will automatically cut off
chemicals supply.
