User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
Chapter 3 Configuring
3-52
To set up custom TCP or UDP port forwarding rules, follow these
steps:
1. Select the User category and click the
Add
button located
below the Available Rules list. This will change the menu to
look like the example below.
Figure 3-31 Port Forwarding User Rules Management
2. Type
a
Rule Name
in the space provided.
3. Select the port
Protocol
from the pull-down menu - you may
select
TCP
,
UDP
or both (
TCP/UDP
).
4. Configure a range of ports for forwarding. Type the lowest
numbered port in the range in the Port Start space. Type the
highest numbered port in the Port End space. For a single port,
just enter the same number in both spaces.
5. Type a number for the Port Map in the space provided.
