Huawei WA1003A-RU Скачать руководство пользователя страница 29

Страница: 29 / 112

User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point

Chapter 3 Configuring

3-1

Chapter 3 Configuring

The first time you setup the WA1003A-RU it is recommended that

you configure the WAN connection using a single computer making

sure that both the computer and the WA1003A-RU are not connected

to the LAN. Once the WAN connection is functioning properly, you

may continue to make changes to WA1003A-RU configuration

including IP settings and DHCP setup. This chapter is concerned with

using your computer to configure the WAN connection and describes

the various menus used to configure and monitor the WA1003A-RU

including how to change IP settings and DHCP server setup.

3.1

WAN Configuration Summary

Connect to the WA1003A-RU

To configure the WAN

connection used by the WA1003A-RU it is first necessary to

communicate with the WA1003A-RU through its management

interface, which is HTML-based and can be accessed using a

web browser. To access the management software your

computer must be able to “see” the WA1003A-RU. Your

computer can see the WA1003A-RU if it is in the same

“neighborhood” or subnet as the WA1003A-RU. This is

accomplished by making sure your computer has IP settings

that place it in the same subnet as the WA1003A-RU. The

easiest way to make sure your computer has the correct IP

settings is to configure it to use the DHCP server in the

WA1003A-RU. The next section describes how to change the

IP configuration for a computer running a Windows operating

system to be a DHCP client.

Содержание WA1003A-RU

















































































































Результаты поиска

Содержание WA1003A-RU

Отзывы:

Бренды по названию

Популярные бренды

Huawei WA1003A-RU, Руководство пользователя

Результаты поиска

Содержание WA1003A-RU

Отзывы:

Бренды по названию

Популярные бренды