User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
Chapter 3 Configuring
3-28
Figure 3-15 Setup – Configure Connection 1 for Bridge
To configure the WAN connection for Bridge, perform the steps
listed below. Some of the settings do not need to be changed the first
time the device is set up, but can be changed later if you choose.
1. Click
the
Connection 1
button under
WAN Setup
to view the
default
PPPoA Connection Setup
configuration menu.
2. Select
Bridge
from the
Type:
pull-down menu. This action will
change the menu so it offers fewer settings for configuration.
3. Type in a
Name:
in the space provided (
WAN_PPPoA
is used
in the above example).
4. If you are told to change the
VPI
or
VCI
values, type in the
values given to you by your service provider. Many users will
be able to use the default settings.
5. Leave the default
QoS
values if you are unsure or the ISP did
not provide this information.
