
User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
Chapter 3 Configuring
3-29
6. Do not change the
PCR
or
SCR
values unless you are
required to do so. If you are told to change these, type in the
values given to you by your service provider.
7. The
Encapsulation
values LLC (SNAP) and VC (MUX) are
two different methods of encapsulating the PPP packet.
Contact your ISP to make sure which encapsulation is being
supported.
8. Click the
Apply
button when you have entered all the
information. The web browser will briefly go blank. You are
now finished changing setting for the primary WAN
connection known as Connection 1. It is now necessary to
save the changes you just made and restart the
WA1003A-RU.
9. To save the changes made to Connection 1, click the
Tools
tab and then click on the
System Commands
button. Click on
the
Save All
button to store the configuration settings. Click
on
Back
button to return to the System Commands menu.
10. Check the WAN connection status. Click the
Status
tab and
then the
Connection Status
button. Look under
WAN
to view
the
State
of Connection 1, it should read
Connected
. If the
WAN connection state does not appear to
Connected
after a
few minutes, go back to the Connection 1 Setup menu, check
the settings and make sure they are correct.
3.5.3 Configure Connection 1 for Static IP for WAN
Static is used whenever a known static IP is assigned. The
accompanying information such as the Subnet mask and the gateway
should also be specified in order to be able to connect. Up to three