User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
Chapter 3 Configuring
3-27
10. To save the changes made to Connection 1, click the
Tools
tab and then click on the
System Commands
button. Click on
the
Save All
button to store the configuration settings. Click
on
Back
button to return to the System Commands menu.
11. Check the WAN connection status. Click the
Status
tab and
then the
Connection Status
button. Look under
WAN
to view
the
State
of Connection 1, it should read
Connected
. If the
WAN connection state does not appear to
Connected
after a
few minutes, go back to the Connection 1 Setup menu, check
the settings and make sure they are correct.
3.5.2 Configure Connection 1 for Bridge
“Bridge” means a pure bridged connection with no IP address
assigned to the WA1003A-RU. This connection method makes the
WA1003A-RU act as a bridge, and just passes packets across the
DSL port. When the device is used in this manner, it is necessary to
install additional connection software on any computer or server used
to access the Internet.
