Huawei ViewPoint 8050, Руководство пользователя

Страница: 26 / 128

24
Setting Up the System for the First Time — Initial Setup Wizard
Ch
apt
er 1 Ins
talla
ti
on and
P
repa
ra
ti
on
Setting Up the System for
the First Time — Initial
Setup Wizard
Design and specifications are subject to change without
notice.
When you turn on the Videoconferencing Terminal for the
first time after installation, the setup wizard appears on the
display.
The items configured with the wizard can be changed later
using the setup menu.
Configuration items may differ depending on the software.
1
Select the language used for menus and messages from
the “
” pull-down list.
:
Available settings are English, Finnish,
French, German, Italian, Japanese, Korean,
Portuguese, Russian, Simplified Chinese, Spanish,
Swedish, Thai, and Traditional Chinese.
2
Click “ ”.
3
Make the following settings for the LAN.
The following examples assume that English has been
selected as display language.
DHCP Mode: Sets the DHCP (Dynamic Host
Configuration Protocol).
Auto: Automatically assigns your IP address,
subnet mask, gateway address and DNS
address.
Off: Deactivates DHCP. In this case you must set
your IP address, subnet mask, gateway
address and DNS address manually.
Host Name: Enter your host name.
IP Address: Enter your IP address.
Network Mask: Enter your subnet mask.
Gateway Address: Enter your default gateway
address.
DNS Address: Enter your DNS (Domain Name
System) server address.
When you set “DHCP Mode” to “Auto”, the assigned
IP address will be shown in the launcher menu (page
26) and Status & Info menu (page 55).
If you do not know the settings required for your LAN
configuration, contact your network administrator.
4
Click “End”.
The settings are saved.
To cancel the setting
Click “Cancel”.
The settings are not saved and the launcher menu appears.
To go back to the previous wizard
Click “Back”.
Note
Note
2/2
End
DHCP Mode
IP Address
Network Mask
Gateway Address
DNS Address
Host Name
Auto Off
Back