SmartACU2000D Smart Array Controller
User Manual (with No PID Module)
2 Overview
Issue 01 (2020-02-14)
Copyright © Huawei Technologies Co., Ltd.
17
No.
Name
Specifications
Quantity
6
Position for the auxiliary
power supply
-
-
7
Position for the Ethernet
switch (SWITCH)
-
1
8
Position for the SmartMBUS
CCO (MBUS CCO)
-
-
9
SmartLogger3000
(SmartLogger)
SmartLogger3000
1
10
Fiber adapter (OFA01: TX1
RX1; OFA02: TX2 RX2)
2LC/PC-2LC/PC-4
2
11
Position for the SPD of the
power over Ethernet (PoE)
module
-
1
12
Position for the PoE module
(POE)
-
1
13
ATB (Access Terminal Box)
-
1
14
Single-phase input switch
(QF03)
32 A/2P
1
15
Three-phase input switch
(FU01)
25 A/3P
1
16
Positions for the longitudinal
encryption device and the
fiber ring network switch
-
-
17
RS485 communications
terminal (JX01)
12P; supports the wires with a cross-sectional area
ranging from 1 mm
2
to 2.5 mm
2
(or 18–14 AWG)
1
18
Position for the
SmartModule1000A01
(SmartModule)
-
1
19
Protective earthing (PE) bar
-
1
Only the SmartACU2000D-D-00 provides the installation positions for the longitudinal encryption
device, fiber ring network switch, and auxiliary power supply, which can be installed on a guide rail.
For details about the installation method, see the installation guide of the components. You are
advised to route cables through the cable trough or cable bridge in the smart array controller. Huawei
device faults caused by any of the three components are not covered by the warranty.
The reserved installation dimensions (W x H x D) are 50 mm x 185 mm x 135 mm for the
longitudinal encryption device, 65 mm x 185 mm x 135 mm for the fiber ring network switch, and
36 mm x 130 mm x 125 mm for the auxiliary power supply.
