Huawei Quidway S3000-EI Series, Руководство по эксплуатации

Страница: 82 / 392

Operation Manual - VLAN
Quidway S3000-EI Series Ethernet Switches
Chapter 3 GARP/GVRP Configuration
Huawei Technologies Proprietary
3-5
z
When an Ethernet port is set to be in Normal registration mode, the dynamic and
manual creation, registration and logout of VLAN are allowed on this port.
z
When one Trunk port is set as fixed, the system will add the port to the VLAN if a
static VLAN is created on the switch and the Trunk port allows the VLAN passing.
GVRP will also add this VLAN item to the local GVRP database, one link table for
GVRP maintenance. However, GVRP cannot learn dynamic VLAN through this
port. The learned dynamic VLAN from other ports of the local switch will not be
able to send statements to outside through this port.
z
When an Ethernet port is set to be in Forbidden registration mode, all the VLANs
except VLAN1 will be logged out and no other VLANs can be created and
registered on this port.
Perform the following configurations in Ethernet port view.
Table 3-5 Set GVRP registration type
Operation Command
Set GVRP registration type
gvrp registration { normal | fixed |
forbidden }
Restore the default GVRP registration
type
undo gvrp registration
By default, GVRP registration type is normal .
3.2.5 Display and Debug GVRP
After the above configuration, execute display command in any view to display the
running of GVRP configuration, and to verify the effect of the configuration. Execute
debugging command in user view to debug the configuration of GVRP.
Table 3-6 Display and debug GVRP
Operation Command
Display GVRP statistics information
display gvrp statistics [ interface
interface-list ]
Display GVRP global status information display gvrp status
Enable GVRP packet or event
debugging
debugging gvrp { packet | event }
Disable GVRP packet or event
debugging undo debugging gvrp { packet |
event }