Huawei Quidway S3000-EI Series, Руководство по эксплуатации

Страница: 337 / 392

Operation Manual - System Management
Quidway S3000-EI Series Ethernet Switches
Chapter 5 SNMP Configuration
Huawei Technologies Proprietary
5-5
5.3.5 Set Lifetime of Trap Message
You can use the following command to set lifetime of Trap message. Trap message that
exists longer than the set lifetime will be dropped.
Perform the following configuration in system view.
Table 5-6 Set the lifetime of Trap message
Operation Command
Set lifetime of Trap message snmp - agent trap life seconds
Restore lifetime of Trap message undo snmp - agent trap life
By default, the lifetime of Trap message is 120 seconds.
5.3.6 Set SysLocation
The sysLocation is a management variable of the MIB system group, used for
specifying the location of managed devices.
You can use the following commands to set the sysLocation.
Perform the following configuration in system view.
Table 5-7 Set sysLocation
Operation Command
Set sysLocation snmp-agent sys-info location sysLocation
Restore the default location of
the Ethernet switch
undo snmp-agent sys-info location
By default, the sysLocation is specified as “Beijing China”.
5.3.7 Set SNMP Version
You can use the following commands to set the Set SNMP Version.
Perform the following configuration in system view.
Table 5-8 Set SNMP Version
Operation Command
Set SNMP Version
snmp-agent sys-info version { { v1 |
v2c | v3 } * | all }
Restore the default SNMP Version of the
Ethernet switch undo snmp-agent sys-info version
{ { v1 | v2c | v3 } * | all }