Huawei Quidway S3000-EI Series, Руководство по эксплуатации

Страница: 166 / 392

Operation Manual - Integrated Management
Quidway S3000-EI Series Ethernet Switches
Chapter 2 HGMP V2 Configuration
Huawei Technologies Proprietary
2-11
Table 2-11 Start topology information collection
Operation Command
Start topology information collection ntdp explore
2.3.8 Display and Debug NTDP
After the above configuration, execute display command in any view to display the
running of the NTDP configuration, and to verify the effect of the configuration.
Table 2-12 Display and Debug NTDP
Operation Command
Display global NTDP information. display ntdp
Display the device information collected
by NTDP.
display ntdp device-list [ verbose ]
When the display ntdp device-list is executed without the verbose parameter, it will
display the list of the devices collected by NTDP. When executed with the verbose
parameter, it will display the detailed information about the devices collected by NTDP.
2.4 Configure Cluster
2.4.1 Cluster Overview
This section describes the relevant configurations of cluster management, including
how to enable and set up a cluster, how to configure public network IP address for
administrator device, how to add/delete a cluster member and how to configure the
handshaking interval etc.
There must be a unique administrator device configured for every cluster. A cluster
contains only one administrator device. When creating a cluster, you are supposed to
designate an administrator device first. It is the entrance and exit to access the cluster
members, that is, a user on the external network can access, configure, manage, and
monitor the cluster members through it. an administrator device recognizes and
controls all the local members, no matter where they are located on the network or how
they are connected. In addition, it is responsible for collecting the topology information
about all the members and candidates to provide useful information for a user when he
establishes a cluster. The administrator device learns the network topology through
NDP/NTDP information collection to manage and monitor the device.
Before performing other configuration tasks, the cluster function is supposed to be
enabled first.
Cluster configuration includes: