manualshive.com logo in svg

Huawei OceanStor 18500 V3, Руководство по функциям

Huawei OceanStor 18500 V3 - мощное хранилище данных с высокой производительностью и надежностью. Здесь можно скачать бесплатно Руководство по функциям, чтобы ознакомиться с возможностями этого устройства. Загрузите его с нашего сайта для получения всей необходимой информации.

Поделиться
Скачать
background image

3.

Log in to the external storage system and create a full LUN copy. The source LUN of the
LUN copy is the LUN of the external storage system and the target LUN is the
secondary LUN of the remote replication. Then start the LUN copy.
The full LUN copy is created and started. After the full LUN copy is complete, its

Running Status

 becomes 

Completed

.

NOTE

In developer mode, run the 

create lun_copy remote name=test local_role=source lun_id=##

remote_device_id=## remote_lun_id=## is_target_lun_check=no

 command.

4.

Delete the full LUN copy.

Step 5

Start to reclaim differences in the data control list (DCL) for the secondary LUN of the DR
center.

NOTE

In developer mode, run the 

change remote_replication clear_difference operation=recycle

 command.

Step 6

Wait 5 minutes and then cancel the reclamation. If you fail to cancel the reclamation, retry 5
minutes later.

NOTE

In developer mode, run the 

change remote_replication clear_difference operation=unrecycle

command.

Step 7

Configure the write protection for the secondary LUN of the remote replication from the
production center to the DR center.

Step 8

Set the property of the secondary LUN (LUN of the DR center) to write back.

NOTE

In developer mode, run the 

change lun lun_id=## write_policy=write_back

 command.

Step 9

Start the remote replication from the production center to the DR center.

----End

A.3 Configuration Operation (Using the LUN Copy
Feature of the Production and DR Centers)

You can create a LUN copy on the storage system of the production center and DR center to
implement initial synchronization for a remote replication.

Prerequisites

l

The production center and the DR center have network established, remote storage
systems configured, and the primary and secondary LUNs created.

l

A LUN has been created on the external storage system. This LUN has the same capacity
as the primary and secondary LUNs of the remote replication.

l

The external storage system is in the production center and connected to the storage
system of the production center. The remote storage system has been configured in the
production center.

l

The external storage system is a Huawei product.

l

The production center supports the snapshot feature and both the production center and
the DR center support the LUN copy feature.

OceanStor V3 Series
Remote Replication Feature Guide for Block

A Using the External Storage System to Perform Initial

Synchronization for a Remote Replication

Issue 06 (2018-01-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

169

Содержание OceanStor 18500 V3
























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для OceanStor 18500 V3

IBM DS3500 Quick Start Manual preview
DS3500
Бренд: IBM Страницы: 18
IBM DS3500 Installation, User & Maintenance Manual preview
DS3500
Бренд: IBM Страницы: 180
Husky AISLE SHIELD Installation Instructions Manual preview
AISLE SHIELD
Бренд: Husky Страницы: 8
Harsco Taylor-Wharton XL-65 Instructions Manual preview
Taylor-Wharton XL-65
Бренд: Harsco Страницы: 26
Olympus Dock & Done S-DVD-100 User Manual preview
Dock & Done S-DVD-100
Бренд: Olympus Страницы: 156
Global Industrial Bench-In-A-Box User Manual preview
Bench-In-A-Box
Бренд: Global Industrial Страницы: 7
SIP 01441 Instructions Manual preview
01441
Бренд: SIP Страницы: 6
Onnto RS-M4QO User Manual preview
RS-M4QO
Бренд: Onnto Страницы: 40
Seagate HAWK 4 Product Manual preview
HAWK 4
Бренд: Seagate Страницы: 68
Keter City 113L Assembly Instructions preview
City 113L
Бренд: Keter Страницы: 2
Hama 104389 Operating Instructions Manual preview
104389
Бренд: Hama Страницы: 8
Gateway DX4320 Hardware Installation Manual preview
DX4320
Бренд: Gateway Страницы: 64
kincrome K8114 Manual preview
K8114
Бренд: kincrome Страницы: 2
DigiSAFE DiskCrypt Mobile DCM300 User Manual preview
DiskCrypt Mobile DCM300
Бренд: DigiSAFE Страницы: 27
Buffalo TeraStation WSS WS5020N6 User Manual preview
TeraStation WSS WS5020N6
Бренд: Buffalo Страницы: 115
Hama Pietas FlashPen Operating Instruction preview
Pietas FlashPen
Бренд: Hama Страницы: 8
IBM N7800 Hardware And Service Manual preview
N7800
Бренд: IBM Страницы: 182
Yardmaster 68 ZGEY Assembly Instructions Manual preview
68 ZGEY
Бренд: Yardmaster Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды