9
2 Installing Bays
(Optional) Connecting bays
9
2e
Connecting plates are delivered with the bays. Obtain the connecting plates at the bottom
of the bay near the rear door.
Connect two adjacent bays using two connecting plates (on the top of the bays).
Connect the two ends of a connecting plate to two neighboring bays using screws. Then fasten the other
connecting plates in the same way.
(Optional) Removing the KVM panel
2f
Loosen the two captive screws on each side of the KVM panel to remove the KVM panel.
If no KVM is configured for the storage
device, skip this step.
