Huawei MU736 HSPA+ M.2 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 81

background image

HUAWEI MU736 HSPA+ M.2 Module
Hardware Guide

RF Specifications

Issue 05 (2014-01-14)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

49



The antenna consists of the antenna body and the relevant RF transmission cable. Take the
RF transmission cable into account when measuring any of the preceding antenna
indicators.



Huawei cooperates with various famous antenna suppliers who are able to make
suggestions on antenna design, for example, Amphenol, Skycross,

etc.

4.5.2

Interference

Besides the antenna performance, the interference on the user board also affects the
radio performance (especially the TIS) of the module. To guarantee high performance
of the module, the interference sources on the user board must be properly controlled.

On the user board, there are various interference sources, such as the LCD, CPU,
audio circuits, and power supply. All the interference sources emit interference signals
that affect the normal operation of the module. For example, the module sensitivity
can be decreased due to interference signals. Therefore, during the design, you need
to consider how to reduce the effects of interference sources on the module. You can
take the following measures: Use an LCD with optimized performance; shield the LCD
interference signals; shield the signal cable of the board; or design filter circuits.

Huawei is able to make technical suggestions on radio performance improvement of
the module.

4.5.3

GSM/WCDMA/GPS Antenna Requirements

The antenna for MU736 must fulfill the following requirements:

GSM/WCDMA/GPS Antenna Requirements

Frequency range

Depending on frequency band(s) provided by the network
operator, the customer must use the most suitable
antenna for that/those band(s)

Bandwidth

70 MHz in GSM850

80 MHz in GSM900

170 MHz in DCS

140 MHz in PCS

70 MHZ in WCDMA850 (25 MHz for diversity antenna)

80 MHz in WCDMA900 (35 MHz for diversity antenna)

445 MHz in WCDMA1700 (AWS) (45 MHz for diversity
antenna)

140 MHz in WCDMA1900 (60 MHz for diversity antenna)

250 MHz in WCDMA2100 (60 MHz for diversity antenna)

2 MHz in GPS

Gain

≤ 2.5 dBi

Impedance

50

Ω

VSWR absolute max

≤ 3:1 (≤ 2:1 for GPS antenna)

«
...
47
48
49
50
51
...
»

Содержание MU736 HSPA+ M.2


















































































Отзывы:

Нет отзывов

Похожие инструкции для MU736 HSPA+ M.2

Бренд: B meters Страницы: 2

Бренд: Vacon Страницы: 50

Бренд: V2 Страницы: 116

Бренд: V2 Страницы: 8

Бренд: V2 Страницы: 25

Бренд: V2 Страницы: 124

Бренд: hager Страницы: 2

Бренд: hager Страницы: 4

AMES 4000SS Series

Бренд: Watts Страницы: 8

Бренд: bihl+Wiedemann Страницы: 16

Бренд: Grundfos Страницы: 23

Бренд: Sungrow Страницы: 4

Бренд: Anilam Страницы: 31

Бренд: Rinnai Страницы: 7

Бренд: Quickie Страницы: 64

Бренд: Kamstrup Страницы: 7

Бренд: Bettis Страницы: 18

Бренд: EisSound Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды