Huawei Enterprise S2700 Series Скачать руководство пользователя страница 40

Страница: 40 / 354

Context

If a device is managed by multiple NM stations that are in the same SNMPv3 user group, note
the following points:

If all the NM stations need to have rights to access the objects in the Viewdefault view
(1.3.6.1), skip the following steps.

If some of the NM stations need to have rights to access the objects in the Viewdefault view
(1.3.6.1), skip Step

If all the NM stations need to manage specified objects on the device, skip Steps

, and

If some of the NM stations need to manage specified objects on the device, perform all the
following steps.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

acl

acl-number

A basic ACL is created to filter the NM station users that can manage the device.

Step 3

Run:

rule

[

rule-id

] {

deny

permit

}

source

{

source-ip-address

source-wildcard

any

}

A rule is added to the ACL.

Step 4

Run:

quit

Return to the system view.

Step 5

Run:

snmp-agent mib-view

{

excluded

included

}

view-name

oid-tree

A MIB view is created, and manageable MIB objects are specified.

By default, an NM station has rights to access the objects in the Viewdefault view (1.3.6.1).

If a few MIB objects on the device or some objects in the current MIB view do not or no
longer need to be managed by the NM station,

excluded

needs to be specified in the command

to exclude these MIB objects.

If a few MIB objects on the device or some objects in the current MIB view need to be
managed by the NM station,

included

needs to be specified in the command to include these

MIB objects.

Step 6

Run:

snmp-agent group

group-name

[

authentication

privacy

] [

read-view

read-view

write-view

write-view

notify-view

notify-view

]

[

acl

acl-number

]

The read and write permissions are configured for the user group.

read-view

needs to be configured in the command if the NM station administrator needs the

read permission in the specified view in some cases. For example, a low-level administrator

Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management

1 SNMP Configuration

Issue 01 (2011-07-15)

Huawei Proprietary and Confidential

Содержание Enterprise S2700 Series



































































































































































































































































































































































Результаты поиска

Содержание Enterprise S2700 Series

Отзывы:

Huawei Enterprise S2700 Series, Руководство по настройке, Страница: 40 / 354

Результаты поиска

Содержание Enterprise S2700 Series

Отзывы: