l
Log in to the router through the console port and run the
display current-configuration
command to check the user-defined authentication mode.
Table 6-1
Follow-up Procedure
Password Mode
Follow-up Procedure
Plain-text password
Obtain the user name and password in the
display
current-configuration
command output.
local-user
admin
password simple
admin
The preceding information shows that the user name is
admin
and the password is
admin
.
local-user admin service-type
telnet
Telnet users must use the user name
admin
and password
admin
to log in to the router.
Cipher-text password
Configure a new password matching the user name. You
can use the new user name and password to log in to the
router.
#
local-user
huawei
password ciper N`C55QK<`=/
Q=^Q`MAF4<1!!
local-user huawei service-type
telnet
#
In the preceding example, the user names of the Telnet
users are
huawei
and their passwords are in cipher text.
Run the following commands to set the passwords of the
huawei
users to
huawei
.
<Huawei>
system-view
[huawei]
aaa
[huawei-aaa]
local-user huawei password simple
huawei
[huawei-aaa]
quit
Huawei AR200-S Series Enterprise Routers
Quick Start Guide
6 FAQs
Issue 01 (2011-12-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
29
