Huawei Airbridge BTS3606A Скачать руководство пользователя страница 51

Страница: 51 / 59

Technical Manual
Airbridge BTS3606A CDMA Base Station

System Description

Chapter 8 Technical Standards

8-1

Chapter 8 Technical Standards

8.1 General Technical Specifications

The BTS3606A is compliance with the following general technical specifications:

TIA/EIA-97-D: Recommended Minimum Performance Standards for Base

Stations Supporting Dual-mode Spread Spectrum Mobile Stations.

Federal IMT-MC (CDMA 2000) Cellular Mobile System Operating in Band 450

MHZ.

C.S0032-0V1.0 Recommended Minimum Performance Standards for CDMA2000

High Rate Packet Data Access Network

C.S0039-0V1.0 Enhanced Subscriber Privacy for CDMA2000 High Rate Packet

Data

C.S0038-0V1.0 Signaling Conformance Specification for High Rate Packet Data

Air Interface

8.2 Um Interface

The BTS3606A is compliance with the following Um interface specifications:

I. Physical layer

TIA/EIA IS -2000-2-A: Physical Layer Standard for CDMA 1X Standards for Spread

Spectrum Systems.

C.S0024-0V4.0 CDMA2000 High Rate Packet Data Air Interface Specifications

II. MAC layer

TIA/EIA IS -2000-3-A: Medium Access Control (MAC) Standard for CDMA 1X

Standards for Spread Spectrum Systems.

III. Service capability

TSB2000: Capabilities Requirements Mapping for CDMA 1X Standards.

8.3 Abis Interface

The BTS3606A is compliance with the following Abis interface specifications:

I. Physical layer

E1 interface:

E1 Physical Interface Specification, September 1996

SDH STM-1

Содержание Airbridge BTS3606A




























































Результаты поиска

Содержание Airbridge BTS3606A

Отзывы:

Похожие инструкции для Airbridge BTS3606A

Бренды по названию

Популярные бренды

Huawei Airbridge BTS3606A, Техническое руководство

Результаты поиска

Содержание Airbridge BTS3606A

Отзывы:

Похожие инструкции для Airbridge BTS3606A

Бренды по названию

Популярные бренды