Huawei Airbridge BTS3606A Скачать руководство пользователя страница 27

Страница: 27 / 59

Technical Manual
Airbridge BTS3606A CDMA Base Station

System Description

Chapter 3 Product Architecture

3-5

3) Performs noise factor– adjustable down-conversion, and channel-selective

filtering.

4) Finally sends the signals to the baseband subsystem.

3.3.3 Antenna Subsystem

The antenna subsystem of the BTS3606A includes the RF antenna and the satellite

synchronization antenna.

RF antenna

This part covers the transmitting and receiving antennas, feeders, antenna

lightning arrester (optional), and tower mounted amplifier (optional). It transmits

and receives signals on the Um interface.

Satellite synchronization antenna

This part includes the satellite signal receiving antenna, feeder, and lightning

arrester. It receives synchronization signals from the satellites (GPS or GLONASS)

to provide precise clock source for the BTS.

3.3.4 Power Supply and Environment Monitoring Subsystem

The power supply and environment monitoring subsystem includes the power supply,

environment monitoring part, and the temperature controller.

Power supply

The power supply consists of:

--AC distribution unit

--DC distribution unit

--Power Supply Units (PSUs, including PSUAC/DC and PSUDC/DC)

--Power Management Unit (PMU)

--Battery group

--Management unit of the battery group

The PSUs work in N+1 redundancy mode. If any PSU fails, an alarm will be

reported. The PSUs support online insertion and removal.

Environment monitoring part

The environment monitoring part includes the PMU and sensors. The PMU

collects the environment variables such as temperature, humidity, smoke, water

and access control from the sensors, and reports them to the BCKM of the BTS.

Based on the preset configuration, the BTS performs operations and reports the

information to the OMC.

Temperature controller

Содержание Airbridge BTS3606A




























































Результаты поиска

Содержание Airbridge BTS3606A

Отзывы:

Похожие инструкции для Airbridge BTS3606A

Бренды по названию

Популярные бренды

Huawei Airbridge BTS3606A, Техническое руководство

Результаты поиска

Содержание Airbridge BTS3606A

Отзывы:

Похожие инструкции для Airbridge BTS3606A

Бренды по названию

Популярные бренды