Huawei Airbridge BTS3606A Скачать руководство пользователя страница 54

Страница: 54 / 59

Technical Manual
Airbridge BTS3606A CDMA Base Station

System Description

Chapter 8 Technical Standards

8-4

IEC 61000-3-3 (1995): Electromagnetic compatibility (EMC) - Part 3: Limits -

Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply

systems for equipment with rated current = 16 A.

IEC 61000-4-2 (1995): Electromagnetic compatibility (EMC) - Part 4: Testing and

measurement techniques - Section 2: Electrostatic discharge immunity test.

IEC 61000-4-3 (1995): Electromagnetic compatibility (EMC) - Part 4: Testing and

measurement techniques - Section 3: Radiated, radio-frequency electromagnetic

field immunity test.

IEC 61000-4-4 (1995): Electromagnetic compatibility (EMC) - Part 4: Testing and

measurement techniques - Section 4: Electrical fast transient/burst immunity test.

IEC 61000-4-5 (1995): Electromagnetic compatibility (EMC) - Part 4: Testing and

measurement techniques - Section 5: Surge immunity test.

IEC 61000-4-6 (1996): Electromagnetic compatibility (EMC) - Part 4: Testing and

measurement techniques - Section 6: Immunity to contacted disturbances,

induced by radio frequency fields.

IEC 61000-4-11 (1994): Electromagnetic compatibility (EMC) - Part 4: Testing and

measurement techniques - Section 11: Voltage dips, short interruptions and

voltage variations. Immunity tests.

ITU -T Recommendation K.20: Resistibility of Telecommunication Switching

Equipment to Overvoltages and Overcurrents.

CFR 47, FCC Part 15: Radio Frequency Device.

TS 25.113v3.1.0: 3rd Generation Partnership Project; Technical Specification

Group Radio Access Networks; Base station EMC.

ITU -R Rec. SM.329-7: Spurious emissions.

GOST R 51318.22-99: Electromagnetic compatibility of technical equipment.

Man-made noise from informational equipment. Limits and test methods.

GOST 30429-96: Electromagnetic compatibility of technical equipment.

Man-made noise from equipment and apparatus used together with service

receiver systems of civil application. Limits and test methods.

8.7 Environment

The BTS3606A is compliance with the following environment requirements:

GB4208 Degrees of protection provided by enclosure (IP code).

GB4798 Environmental conditions for electrician and electronic products

application.

IEC 60529 "Degrees of protection provided by enclosure (IP code)"

IEC 60721-3-1: Classification of environmental conditions- Part3: Classification of

groups of environmental parameters and their severities-Section 1: Storage.

IEC 60721-3-2: Classification of environmental conditions- Part3: Classification of

groups of environmental parameters and their severities-Section 2:

Transportation.

Содержание Airbridge BTS3606A




























































Результаты поиска

Содержание Airbridge BTS3606A

Отзывы:

Похожие инструкции для Airbridge BTS3606A

Бренды по названию

Популярные бренды

Huawei Airbridge BTS3606A, Техническое руководство

Результаты поиска

Содержание Airbridge BTS3606A

Отзывы:

Похожие инструкции для Airbridge BTS3606A

Бренды по названию

Популярные бренды